- Mac Os Catalina Virtualbox Install
- Virtualbox Mac Catalina Install
- Virtualbox Mac Catalina
- Virtualbox Mac Catalina Install Failed
- Mac Catalina On Virtualbox Amd
This document will provide instructions on getting a macOS Catalina install working with Guest Additions on VirtaulBox 6.1.
- MacOS 10.15.3 Catalina Final (One Full — 7) — The macOS Catalina VMware and VirtualBox image is present in two distinct sizes. The very first one is the only one file. The next one is split into components which are available to download into several components.
- This macOS Catalina (VMDK) file format may be used to install and operate macOS Catalina on VMware Workstation, Player, Fusion, and VirtualBox. The best part is, the single macOS Catalina VMware and VirtualBox image work for VMware and VirtualBox.
- I won’t say this is the way to install macOS Catalina on VirtualBox, but it’s certainly a way, and it’s difficult to find information about a way to do it. There are a lot of posts indicating that 10.15 or 10.15.1 worked but 10.15.2 and beyond don’t. Or that there are difficulties with VirtualBox and APFS.
Mac Os Catalina Virtualbox Install
Start by downloading a copy of the installer from the App Store. You will need a computer running macOS and you will need to convert the installer to an ISO. I will not be covering these steps here, but there are plenty tutorials online.
Download macOS Catalina ISO. You have to get macOS Catalina ISO in the link. Step 3: Before starting Multibeast, you have to go the 'Security' section of System Preferences in Mac OS X, go to the 'General' section, and check 'Anywhere' in the 'Allow applications' section. Once that's done, run Multibeast and install the following options. Step 4: Just tick the correct options as shown below.
I’m hoping you already have this part covered and you are coming here only because you had issues getting macOS installed, but just in case, make sure the following packages are installed (Arch):
Creating the VM
Start by creating a new VM. Give it a name without spaces.
Give it enough memory so the install will run faster. We can change this later.
Select to create a new Virtual Hard Disk
Select fixed size
Give it a bare minimum of 25GB (I would advise on at least 50GB if you can spare the space)
Edit the machine, go into «System => Motherboard» and disable floppy boot and change the chipset to
In the processor give more CPU if you can spare
In «Display => Screen» increase the video memory to 128MB and enable 3D acceleration
Enable USB 3.0
Note: if you can’t see USB 3.0 you might need to add your user to the
Insert the install ISO
Now we need to run a few
vboxmanage commands for additional settings. Either run the lines with
vboxmanage from the script below (add your virtual machine name under
$vm_name), or save the full script and run it.
Note: the default resolution is set to «1280x1024». You can change it in the last line of the update code. Make sure to keep it to “640x480, 800x600, 1280x1024, 1440x900, 1900x1200“
We are now ready for the install. Start the machine and select you language.
Select disk utility.
Select the VirtualBox hard disk and click on erase.
Give it a name, select the same options and click on erase. Close the disk utility when done.
Click on install macOS.
Continue with the install as you would until you are presented with the desktop.
Note that the installer will reboot once in the middle of the install.
Installing Guest Additions
We now need to get Guest Additions installed. Remove the install ISO and mount the guest additions CD. Open it with finder and run the
Install it as if you would install any other package.
You will most likely get an error message that the install has failed.
Close everything, unmount the guest additions CD and open a terminal window (Command+Space, type terminal).
Now we need to restart the VM in recovery mode. Type in:
Once it has rebooted into recovery mode, on the top click on «Utilities => Termminal»
Type in the code below. This is to sign Oracle software as authorized. Then we disable recovery mode and restart the VM.
When the VM has rebooted you should have guest additions working. Remember that not everything works, but the features below should:
Virtualbox Mac Catalina Install
- ~Drag and Drop~ Reported as not working (see comments)
- VirtualBox Shared Folders
- Guest Control
|Reported by:||Owned by:|
|Component:||guest additions||Version:||VirtualBox 6.0.14|
|Guest type:||OSX Server||Host type:||Mac OS X|
- catalina-guest-install.log (5.8 KB) - added by Kalak18 months ago.
- install.log from a guest additions install on macOS 10.15 Catalina
- macOS10.15-2019-10-07-17-24-21.log (286.6 KB) - added by Kalak18 months ago.
- machine log from macOS host
Virtualbox Mac Catalina
Changed 18 months ago by Kalak
- attachmentcatalina-guest-install.log added
Changed 18 months ago by Kalak
Virtualbox Mac Catalina Install Failed
- attachmentmacOS10.15-2019-10-07-17-24-21.log added
comment:1 in reply to: ↑ description Changed 18 months ago by socratis
comment:3 Changed 14 months ago by aeichner
- Status changed from new to closed
- Resolution set to fixed
comment:4follow-up:↓ 5 Changed 14 months ago by GlebKh
comment:5 in reply to: ↑ 4 Changed 14 months ago by QA
comment:6follow-ups:↓ 7↓ 12 Changed 11 months ago by AKuehnel
comment:7 in reply to: ↑ 6 Changed 10 months ago by GammaG
comment:8 Changed 10 months ago by paulson
- Status changed from closed to reopened
- Resolutionfixed deleted
comment:9 Changed 10 months ago by paulson
Mac Catalina On Virtualbox Amd
- Summary changed from Guest Additions not installing on macOS 10.15 Catalia guests to Guest Additions not installing on macOS 10.15 Catalina guests