R Switch

Discover Nintendo Switch, the video game system you can play at home or on the go. Plus, get the latest games and news on the official Nintendo site. R switch statement provides decision making capability. It allows to select one of the cases based on the value of an expression. There are two ways in which one of the cases is selected. Section 5.2 dives into the details of if, then discusses the close relatives ifelse and switch. Section 5.3 starts off by reminding you of the basic structure of the for loop in R, discusses some common pitfalls, and then talks about the related while and repeat statements. Description: The R-Series Curvette single pole rocker switches are aesthetically pleasing miniature snap-in switches. Due to the patented mounting ear design, they are compatible with a wide range of standard panel cutouts. The above is an informal and general directive for financial planning and does not imply additional rules for /r/switch or any kind of individual advice for you personally. Please seek a qualified financial professional for personal advice that fits your individual needs and circumstances.

switch works in two distinct ways depending whether the first argument evaluates to a character string or a number.

If the value of EXPR is not a character string it is coerced to integer. Note that this also happens for factors, with a warning, as typically the character level is meant. If the integer is between 1 and nargs()-1 then the corresponding element of is evaluated and the result returned: thus if the first argument is 3 then the fourth argument is evaluated and returned.

If EXPR evaluates to a character string then that string is matched (exactly) to the names of the elements in . If there is a match then that element is evaluated unless it is missing, in which case the next non-missing element is evaluated, so for example switch('cc', a = 1, cc =, cd =, d = 2) evaluates to 2. If there is more than one match, the first matching element is used. In the case of no match, if there is an unnamed element of its value is returned. (If there is more than one such argument an error is signaled.)

The first argument is always taken to be EXPR: if it is named its name must (partially) match.

A warning is signaled if no alternatives are provided, as this is usually a coding error.

This is implemented as a primitive function that only evaluates its first argument and one other if one is selected.

5.1 Introduction

There are two primary tools of control flow: choices and loops. Choices, like if statements and switch() calls, allow you to run different code depending on the input. Loops, like for and while, allow you to repeatedly run code, typically with changing options. I’d expect that you’re already familiar with the basics of these functions so I’ll briefly cover some technical details and then introduce some useful, but lesser known, features.

The condition system (messages, warnings, and errors), which you’ll learn about in Chapter 8, also provides non-local control flow.



Want to skip this chapter? Go for it, if you can answer the questions below. Find the answers at the end of the chapter in Section 5.4.

  • What is the difference between if and ifelse()?

  • In the following code, what will the value of y be if x is TRUE?What if x is FALSE? What if x is NA?

  • What does switch('x', x = , y = 2, z = 3) return?


  • Section 5.2 dives into the details of if, then discussesthe close relatives ifelse() and switch().

  • Section 5.3 starts off by reminding you of the basic structureof the for loop in R, discusses some common pitfalls, and then talksabout the related while and repeat statements.

5.2 Choices

The basic form of an if statement in R is as follows:

If condition is TRUE, true_action is evaluated; if condition is FALSE, the optional false_action is evaluated.

Typically the actions are compound statements contained within {:

if returns a value so that you can assign the results:

(I recommend assigning the results of an if statement only when the entire expression fits on one line; otherwise it tends to be hard to read.)

When you use the single argument form without an else statement, if invisibly (Section 6.7.2) returns NULL if the condition is FALSE. Since functions like c() and paste() drop NULL inputs, this allows for a compact expression of certain idioms:

5.2.1 Invalid inputs

The condition should evaluate to a single TRUE or FALSE. Most other inputs will generate an error:

The exception is a logical vector of length greater than 1, which generates a warning:

In R 3.5.0 and greater, thanks to Henrik Bengtsson, you can turn this into an error by setting an environment variable:

I think this is good practice as it reveals a clear mistake that you might otherwise miss if it were only shown as a warning.

5.2.2 Vectorised if

Given that if only works with a single TRUE or FALSE, you might wonder what to do if you have a vector of logical values. Handling vectors of values is the job of ifelse(): a vectorised function with test, yes, and no vectors (that will be recycled to the same length):

Note that missing values will be propagated into the output.

I recommend using ifelse() only when the yes and no vectors are the same type as it is otherwise hard to predict the output type. See https://vctrs.r-lib.org/articles/stability.html#ifelse for additional discussion.

Another vectorised equivalent is the more general dplyr::case_when(). It uses a special syntax to allow any number of condition-vector pairs:

5.2.3switch() statement

Closely related to if is the switch()-statement. It’s a compact, special purpose equivalent that lets you replace code like:

with the more succinct:

The last component of a switch() should always throw an error, otherwise unmatched inputs will invisibly return NULL:

If multiple inputs have the same output, you can leave the right hand side of = empty and the input will “fall through” to the next value. This mimics the behaviour of C’s switch statement:

It is also possible to use switch() with a numeric x, but is harder to read, and has undesirable failure modes if x is a not a whole number. I recommend using switch() only with character inputs.

5.2.4 Exercises

  1. What type of vector does each of the following calls to ifelse()return?

    Read the documentation and write down the rules in your own words.

  2. Why does the following code work?

5.3 Loops

for loops are used to iterate over items in a vector. They have the following basic form:

For each item in vector, perform_action is called once; updating the value of item each time.

(When iterating over a vector of indices, it’s conventional to use very short variable names like i, j, or k.)

N.B.: for assigns the item to the current environment, overwriting any existing variable with the same name:

There are two ways to terminate a for loop early:

  • next exits the current iteration.
  • break exits the entire for loop.

5.3.1 Common pitfalls

There are three common pitfalls to watch out for when using for. First, if you’re generating data, make sure to preallocate the output container. Otherwise the loop will be very slow; see Sections 23.2.2 and 24.6 for more details. The vector() function is helpful here.

Next, beware of iterating over 1:length(x), which will fail in unhelpful ways if x has length 0:

This occurs because : works with both increasing and decreasing sequences:

Use seq_along(x) instead. It always returns a value the same length as x:

Finally, you might encounter problems when iterating over S3 vectors, as loops typically strip the attributes:

Work around this by calling [[ yourself:

R Switch Function

5.3.2 Related tools

for loops are useful if you know in advance the set of values that you want to iterate over. If you don’t know, there are two related tools with more flexible specifications:

  • while(condition) action: performs action while condition is TRUE.

  • repeat(action): repeats action forever (i.e. until it encounters break).

R does not have an equivalent to the do {action} while (condition) syntax found in other languages.

You can rewrite any for loop to use while instead, and you can rewrite any while loop to use repeat, but the converses are not true. That means while is more flexible than for, and repeat is more flexible than while. It’s good practice, however, to use the least-flexible solution to a problem, so you should use for wherever possible.

Generally speaking you shouldn’t need to use for loops for data analysis tasks, as map() and apply() already provide less flexible solutions to most problems. You’ll learn more in Chapter 9.

5.3.3 Exercises

  1. Why does this code succeed without errors or warnings?

  2. When the following code is evaluated, what can you say about thevector being iterated?

  3. What does the following code tell you about when the index is updated?

Switch In R Studio

5.4 Quiz answers


  • if works with scalars; ifelse() works with vectors.

  • When x is TRUE, y will be 3; when FALSE, y will be NULL;when NA the if statement will throw an error.

  • This switch() statement makes use of fall-through so it will return 2.See details in Section 5.2.3.