This is a brief history of what years seat belt anchorage points were added to U.S. automobiles: Most U.S. passenger cars, starting with 1962 models, have seat belt anchorages for at least 2 lap belts in the front seat, but not all autos. Beginning in 1964, all U.S. cars were manufactured with seat belt anchorages for at least two lap belts in the front seat. Since January 1968, U.S. passenger car and light truck manufacturers have been required to install lap belt and shoulder belt anchorages at each front 'outboard' (driver side and passenger side, not middle) seating position (except convertibles) as well as lap belt anchorages at all other seating positions. Since 1/1/72, these same requirements became effective for trucks. In 1986, GM began to phase in 3 point (lap belts with shoulder harness) for the rear outboard seats of their vehicles and the other major U.S. manufacturers followed suit over the next 3-4 years.
The (NHTSA) National Highway Traffic Safety Administration has a legislative mandate under Title 49 of the United States Code, Chapter 301, Motor Vehicle Safety, to issue (FMVSS) Federal Motor Vehicle Safety Standards and Regulations to which manufacturers of motor vehicle and equipment must conform and certify compliance. On March 1st, 1967, FMVSS 209 was the first standard to become effective. A number of Federal Motor Vehicle Safety Standards became effective for vehicles manufactured on and after January 1, 1968. Since then, other FMVSS have been issued. New amendments and standards to existing standards can be found in the Federal Register.
These Federal safety standards are regulations written in terms of minimum safety performance requirements for motor vehicles or motor vehicle equipment. These requirements are clearly described in such a way 'that the public is protected against unreasonable risk of crashes occurring as a result of the design, construction, or performance of motor vehicles and is also protected against unreasonable risk of death or injury in the event crashes do occur.'
Important: If the necessary anchorage points are NOT present, then proper anchorage points must be safely added before installation.
Clark Forklift History
8V-60V 126W Car Truck Off-Road Forklift ATV LED Work Light Fog Lamp Flood Lights. New (Other) $39.99. Was: Previous Price $49.99. Jul 29, 2020 How To Get a Forklift Certification. There are two ways to become a certified forklift operator: online certification and employer-provided training. The route you choose often depends on what your employer offers. Get Your Own Certification Online. You can get your forklift license through online training providers.
With its ‘Build to Last' slogan, Clark Forklift managed to sustain its operations and reputation by providing quality and cost-effective forklifts. Its long-standing reputation about different kinds of forklifts; electric forklifts, diesel and LPG-powered forklifts for industrial applications is anchored on a long history of innovation, dating back to 1917.
It’s not hard to show to people how Clark Forklifts and Parts are some of the most reliable machinery in the market today precisely because their products’ quality and high-performance speak for themselves. For starters, it’s quite easy to get a hold of a series of testimonials that present how the Clark Forklifts today help their companies improve their business goals.
From the thriving amusement park Luna Park Sydney to other loyal customers all over, Clark has proven that it can supply the service forklifts needed to run business operations in an organized, efficient and safe working environment.
The rich and thriving history of Clark has since started in 1917 when the company invented the first forklift truck. From then, it found its strength and energy to manufacture and distribute over 1 million units of forklifts across the international market. Right now there are around 350,000 Clark forklifts being actively employed, and that remarkable record is what’s giving the company the trustworthiness for many customers to avail of the company’s progressive and problem-centered services and products.
Supreme Internal Combustion Forklifts
It must be added here that the internal combustion forklifts from Clark have never been a disappointment. They are built over years of truck innovation, industry-firsts, and impeccable engineering, especially with the CLARK S-Series forklifts. This S-Series has been a product developed for over 3 years already, which implies that its prototyping and input has undergone already a rigorous level of field testing.
The CLARK S-Series Internal Combustion Forklifts also have an interactive LCD dash, onboard reporting of control functions that make the operators’ life run easily and a full-on telemetry system. Its Australian ergonomics, CLARK Vertical Mast System and Load Weight Scale are also outstanding and have indeed captured the attention of the most demanding business owners.
Battery Electric Forklifts
As people already know, Clark has been a global leader in manufacturing forklift trucks for more than 90 years already. And this dedication and tradition for quality that’s 'Built To Last' is also the essence ingrained in every battery electric forklift available in their line-up. One example in this series of battery electric forklifts is the CLARK ECX 20/32 Series. Such series is exemplified in the market for its cushion tire and fuel-efficient and attractive style machine structure. It gives high value to the comfort of the operator and yet it is equipped with the robust muscle and durability that gets any job in the market done.
Clark is notable, too, for the reliability it has shown for its customers, and it’s this trust it from loyal customers that makes the firm a globally leading business that has built manufacturing locations across Asia, Australia, Europe, and the USA. These locations are dedicated to bringing the best out of the company as a brand to retain its reputation of being an outstanding service and solutions provider.
It must be mentioned, too, that the company’s South-East Asia location is managed by Clark International South Pacific with it is Head Office being at Sydney, Australia. It’s this kind of topnotch leadership across various countries that keeps Clark performing at its top performance.
The Basic Tructractor and Modern C60-80 Heavy-Duty Four Wheel Lift Trucks
From the start of 1917, the company offered the first Tructractor, built in Buchanan, Michigan, which was the world's first internal combustion-powered truck for industrial purposes. The original configuration was a flatbed that can be loaded and unloaded manually. The workers and employees of Clark, initially used this simple machine to move materials between its various departments.However, as soon as casual visitors and fellow businesspersons noticed this simple machine, many asked for reproductions of these machines for their outfits. Clark resorted to build eight machines in 1918 and increased the production to 75 units after a year. Different models of lift trucks were introduced with the onset of year 1922, including the Truclift, the world's first hydraulically powered lift truck. This innovation was a paradigm shift; leaving behind the orthodox mechanical gears, winch and cable system. Clark had always been taking pride in excellence; the company kept introducing more innovative modified machines to suit the growing user requirements. Some of the popular models of forklifts introduced by Clark include Duat tow tractorbuilt in 1923, with a pull capacity of 1500 lbs.Clarktor tow tractor capable of pulling 2000 to 26000 lbs was introduced in 1926, Carloader in 1938, Utilitructhe very next year and the Clipper in 1941. All of these machines werehighly specialized forklifts that workedpromisingly for various industrial applications.
By 1941, Clark decided to manufacture forklift trucks for use in war by the Allied. It was peak time in World War II when Clark grabbed the opportunity, immensely enhanced its manufacturing capacity and served almost every airfield under the control of Allied with the presence of its Forklift or the tow tractor.
The innovation spree kept its course unintimidating and new forklift, known as the Planeloader, came into existence for off-road works in 1943. The basic aim was to serve the military purposes but agriculture industry and contractors cheerfully accepted it. Owing to theinnovative and successful forklift model, Clark was honored to be the first recipient of the Army Navy ‘E' Award. During this time, Clark became the first manufacturer to put consumer warnings on forklift trucks.
Off-road Forklift Lift Shed
Clark stepped into overseas production by the year 1948, by joining up with Tutt Bryant Limited, Sydney, Australia. Another milestone was achieved in 1956 when it introduced its Clarklift family line. This new line featured forklift trucks that are electrically-powered and run by internal combustion engine. New models were introduced, all anchored on safety and reliability. The innovations and changes for safety and reliability were not just seen in the actual units manufactured, but also in the user manuals provided by the company. In fact, Clark was the first to come up with the ‘Employer's Guide to Material Handling Safety'. By 1997, the company registered its one millionth Clark forklift truck called the CDP25H Megastat and journey went on traversing the path of excellence.
Clark Continues Tradition of Excellence and ‘Built to Last' Slogan
Maintaining the rich legacy, Clark progressed by leaps and bounds and today it offers a complete line of forklift trucks that works in various and diversified industrial environments. At present, more than 250,000 Clark lift trucks are used in North America and the volume increases to over 350,000 pieces operating globally. Clark is now operating in the industry with five major lines; with lift trucks of 15,000 to 18,000 lbs weight carrying capacity. Companies and individual buyers can choose from electric, diesel, LPG-powered, dual fuel electric powered forklift trucks. For example, if there is a need to operate on demanding industrial work, then the C-40 series is highly recommended.Moreover, the C50s and C55s GEN2 Series also promise compliance to the excessive industrial workload. These diesel/LPG pneumatic-powered forklift trucks have a load capacity of at least 8,000 lbs. The C-40 series is backed by a two-stage filter system that takes out 98 percent of the incoming dirt and dust before being processed by the filter media. Electric forklifts are also available in GTX 16/18/20s that feature low step height that facilitates ease of exit and entry. These series of forklifts from Clark can move loads at the tightest turns with 90° turn axles.Within the past nine decades, Clark as one of the most progressive and forthcoming manufacturer in the fields of production, innovation and customer needs evaluation. Its customer support network is present on over 230 locations in North America rendering complete and timely support.
Clark was the pioneer in introducing operator restraint system meant to ensure the protection and safety of forklift operators. All the competitors in industry subsequently adopted the system as a standard feature. Clark kept its tradition in picking the First Slot in the world for embracing ISO 9001 standard for the entire range of its forklift production worldwide. The entire chain of Clark manufacturing units worldwide are now ISO 9001 compliant. Clarks Korean facility has also been an ISO 14001 certification compliant since 2001, which ensures the company's efforts to remain environment friendly.
Clark also maintains an online parts store to accommodate requests for purchase and replacements. Those looking to repair and improve their forkliftsalsoreap benefits from the facility. A merchandising section on its website is available for those who want to shop for Clark memorabilia and collections. The company's North American Parts Distribution Center is located in Louisville, Kentucky, stocking more than 40,000 items and 150,000 product applications, all ‘Built to Last'. Today, Clark shines with its production units in Korea, Germany, Brazil and China besides an Omni presence in United States. The company is keeping its rich legacy of ever-growing innovation and dominance in the industry, traversing swiftly into the future on a path of excellence.
Off Road Forklift Training
Clark Forklift Parts
The company's North American Parts Distribution Center is located in Kentucky, USA, and comprises of more than 40,000 components with several product applications. All of Clark's products are designed, manufactured and delivered with a single motto “Built to last”, which aims at making customers' investment in its products and parts worthy. The company makes use of its excellent delivery techniques, years of experience, and competent pricing to enable customers to enjoy their forklift maintenance painlessly as well as cost-effectively.
Clark has a wide network of more than 200 dealer locations, with every dealership focusing on providing customers with as many choices as possible to meet up with their business needs pertinent to performance and productivity. This is the reason why the company is believed to offer the best value in products and services in the overall material handling industry. Few of the products manufactured by Clark include couplings, tail lights, replacement forks, gear parts, rotators, wiring, sensors, bushings, gears, and brake assembly.
The company also remanufactures a complete line of control cards, electric DC motors, hydraulic components, steer axles, transmissions and engines. Clark has also introduced a service and parts lookup system called PartsPRO. This new system enables customers to perform maintenance on their own and order parts and schedule service for their material handling equipments directly online. Focus on safety is another factor that accounts to the huge success of the company by achieving customer satisfaction. It offers a complete range of products, parts, and services to help organizations enhance material handling safety in their company.